Classic 3 Leg
With Shelf Supports
Have your top supported by our Classic washstand featuring stamped ball joints brazed on to the 32mm tube and sat upon our ball and taper feet. Available in all of our standard brassware finishes.
Available at a height, width and depth to your specification. The top rail and bottom rails are set at 200mm from the top and floor by default, but can be set to a position you require. The top rail and/or shelf support rails can be heated utilising the same dry line heating cable featured in our towel warmers.
Ball and taper feet include +/- 5mm adjustment for installation on uneven floors.
All stands are supplied with a support angle for supporting your top to the wall which is finished the same as the stand ordered.
All of our washstands are made to order at our factory in Stourbridge, England.